Description: This dataset shows the boundaries of public safety answering points - the geographic boundaires that determine where an emergency call is routed. A Public Safety Answering Point (PSAP) is a state-managed local center where all 911 calls are routed. They are typically located at a local or county level. There are 4,459 PSAPs in the U.S. At the PSAP, trained emergency personnel receive 911 calls and make decisions as to what emergency service to dispatch in order to best accommodate the situation (fire, ambulance, etc).This file contains ESN numbers. An Emergency Service Number (ESN) (XXX) is assigned to the subscriber's telephone number in the tandem office translations The ESN represents a seven digit number by which the tandem office routes the call to the proper PSAP. PSAPs with ALI capabilities also receive a display of the ESN information which shows which police, fire and rescue agency serves the telephone number calling 911. An ESN is a unique combination of police, fire, and rescue service for purposes of routing the E911 call.This dataset also include ORI numbers. An ORI (Originating Agency Identifier) is a nine character identifier assigned to an agency that has met the established qualifying criteria for a fingerprint based background check.
Description: This dataset shows the boundaries of public safety answering points - the geographic boundaires that determine where an emergency call is routed. A Public Safety Answering Point (PSAP) is a state-managed local center where all 911 calls are routed. They are typically located at a local or county level. There are 4,459 PSAPs in the U.S. At the PSAP, trained emergency personnel receive 911 calls and make decisions as to what emergency service to dispatch in order to best accommodate the situation (fire, ambulance, etc).This file contains ESN numbers. An Emergency Service Number (ESN) (XXX) is assigned to the subscriber's telephone number in the tandem office translations The ESN represents a seven digit number by which the tandem office routes the call to the proper PSAP. PSAPs with ALI capabilities also receive a display of the ESN information which shows which police, fire and rescue agency serves the telephone number calling 911. An ESN is a unique combination of police, fire, and rescue service for purposes of routing the E911 call.This dataset also include ORI numbers. An ORI (Originating Agency Identifier) is a nine character identifier assigned to an agency that has met the established qualifying criteria for a fingerprint based background check.
Description: The Office of the Assessor maintains assessment records of real and personal property in the County of Los Angeles. Many of these records are available for sale. The data is available in the form of CD-ROM, DVD, hardcopy, and on-line access. The Office of the Assessor also offers a GIS Tax Parcel Base Map.Some layers included (not an exhaustive list):parcel boundary map (shapefile format)local rollLA County wall mappublicly owned parcelssales listunsecured rolland labels (for mailings)A discussion of parcel accuracyOccasionally questions about the spatial accuracy of parcel information come up. In general, it is important to note that the parcels are for tax assessment purposes only, come from many sources, some historical, and are not necessarily survey grade. That said, they are in general extremely reliable.Here is a longer description from Emilio Solano, head of the Assessor Mapping and GIS Services:The very short answer is this: our data is in its majority accurate within a couple of feet, in other cases will not be so accurate.The issue of accuracy when applied to assessor’s data is very subjective. Our data is very accurate if we consider that all the information matches recorded information, we try our best to keep recent data as it was recorded, and older data gets slightly adjusted to match the most recent data. Another factor to consider is that about one third of the total number of new parcels created every year comes from deeds, not subdivision maps, that is, there is not, in the majority of the cases, any new survey data, more likely general descriptions of where the new boundaries should exist, or references to adjacent properties, even calls to documents recorded many years ago, referring to them just by the document number. In those cases we have to consider the intent of the owner when describing the property in the deed.Another couple of factors that have an impact in the accuracy of our data comes from the fact that we assembled this vast amount of information with digital data provided from at least a dozen of cities, Los Angeles, Long Beach, Torrance, etc. plus all the data gathered by LACO DPW in CAD format. We had to compile all that data, rectify it and adjusted as needed, always keeping in mind that the integrity of the data should be maintained by matching RECORDED information. Another factor is that the data was also coming from tens of thousands of individual recordings, it wasn’t as clean cut as when you look at a single subdivision, no matter how big, where every line is clearly identified by a bearing and a distance within a perfectly traced boundary. Our original data sources even go back as far as remainder pieces of land described by Spanish grants and ranchos, section land plus newer surveys.Even though we always input our data based on survey records using COGO tools, whenever possible, a lot of the data is not. Considering all that, our GIS layer is by far, the most accurate data set of its size available anywhere in the county, both in positional accuracy, and conformity to the information provided by legal sources.All that being said, the resulting fact is that, as mark mentioned, in some areas our data will be very accurate, in others it won’t. The most important thing to keep in mind is that given that our responsibility is to reflect property information as recorded, we do not use anything else as a guide, for example we never use an aerial image to change the position of a line just because it doesn’t fall on top of a fence shown on a photo; remember that many people build their fenced, especially the ones made out of concrete blocks, a couple of inches inside the property boundary because is difficult to dig a trench along an existing wooden or wire fence, now multiply those little variances spread out over a 4000+ square miles of land and you will get a picture of what we are up to.That’s why we continually try to stress in anybody using our data that, if they need total accuracy they will need to hire a surveyor to get it. Our 11 by 17 maps are our only official source of information and should only be used for assessment purposes, or in the case of other uses, just for information, to get an accurate idea of how close to the real location a line could be.
Service Item Id: c1a492a67a664c5b9fde717647f6436d
Copyright Text: Emilio Solano
Los Angeles County
Assessor
500 W Temple Street
Los Angeles, CA 90012
esolano@assessor.lacounty.gov
Description: The Office of the Assessor maintains assessment records of real and personal property in the County of Los Angeles. Many of these records are available for sale. The data is available in the form of CD-ROM, DVD, hardcopy, and on-line access. The Office of the Assessor also offers a GIS Tax Parcel Base Map.Some layers included (not an exhaustive list):parcel boundary map (shapefile format)local rollLA County wall mappublicly owned parcelssales listunsecured rolland labels (for mailings)A discussion of parcel accuracyOccasionally questions about the spatial accuracy of parcel information come up. In general, it is important to note that the parcels are for tax assessment purposes only, come from many sources, some historical, and are not necessarily survey grade. That said, they are in general extremely reliable.Here is a longer description from Emilio Solano, head of the Assessor Mapping and GIS Services:The very short answer is this: our data is in its majority accurate within a couple of feet, in other cases will not be so accurate.The issue of accuracy when applied to assessor’s data is very subjective. Our data is very accurate if we consider that all the information matches recorded information, we try our best to keep recent data as it was recorded, and older data gets slightly adjusted to match the most recent data. Another factor to consider is that about one third of the total number of new parcels created every year comes from deeds, not subdivision maps, that is, there is not, in the majority of the cases, any new survey data, more likely general descriptions of where the new boundaries should exist, or references to adjacent properties, even calls to documents recorded many years ago, referring to them just by the document number. In those cases we have to consider the intent of the owner when describing the property in the deed.Another couple of factors that have an impact in the accuracy of our data comes from the fact that we assembled this vast amount of information with digital data provided from at least a dozen of cities, Los Angeles, Long Beach, Torrance, etc. plus all the data gathered by LACO DPW in CAD format. We had to compile all that data, rectify it and adjusted as needed, always keeping in mind that the integrity of the data should be maintained by matching RECORDED information. Another factor is that the data was also coming from tens of thousands of individual recordings, it wasn’t as clean cut as when you look at a single subdivision, no matter how big, where every line is clearly identified by a bearing and a distance within a perfectly traced boundary. Our original data sources even go back as far as remainder pieces of land described by Spanish grants and ranchos, section land plus newer surveys.Even though we always input our data based on survey records using COGO tools, whenever possible, a lot of the data is not. Considering all that, our GIS layer is by far, the most accurate data set of its size available anywhere in the county, both in positional accuracy, and conformity to the information provided by legal sources.All that being said, the resulting fact is that, as mark mentioned, in some areas our data will be very accurate, in others it won’t. The most important thing to keep in mind is that given that our responsibility is to reflect property information as recorded, we do not use anything else as a guide, for example we never use an aerial image to change the position of a line just because it doesn’t fall on top of a fence shown on a photo; remember that many people build their fenced, especially the ones made out of concrete blocks, a couple of inches inside the property boundary because is difficult to dig a trench along an existing wooden or wire fence, now multiply those little variances spread out over a 4000+ square miles of land and you will get a picture of what we are up to.That’s why we continually try to stress in anybody using our data that, if they need total accuracy they will need to hire a surveyor to get it. Our 11 by 17 maps are our only official source of information and should only be used for assessment purposes, or in the case of other uses, just for information, to get an accurate idea of how close to the real location a line could be.
Service Item Id: c1a492a67a664c5b9fde717647f6436d
Copyright Text: Emilio Solano
Los Angeles County
Assessor
500 W Temple Street
Los Angeles, CA 90012
esolano@assessor.lacounty.gov
Description: The Office of the Assessor maintains assessment records of real and personal property in the County of Los Angeles. Many of these records are available for sale. The data is available in the form of CD-ROM, DVD, hardcopy, and on-line access. The Office of the Assessor also offers a GIS Tax Parcel Base Map.Some layers included (not an exhaustive list):parcel boundary map (shapefile format)local rollLA County wall mappublicly owned parcelssales listunsecured rolland labels (for mailings)A discussion of parcel accuracyOccasionally questions about the spatial accuracy of parcel information come up. In general, it is important to note that the parcels are for tax assessment purposes only, come from many sources, some historical, and are not necessarily survey grade. That said, they are in general extremely reliable.Here is a longer description from Emilio Solano, head of the Assessor Mapping and GIS Services:The very short answer is this: our data is in its majority accurate within a couple of feet, in other cases will not be so accurate.The issue of accuracy when applied to assessor’s data is very subjective. Our data is very accurate if we consider that all the information matches recorded information, we try our best to keep recent data as it was recorded, and older data gets slightly adjusted to match the most recent data. Another factor to consider is that about one third of the total number of new parcels created every year comes from deeds, not subdivision maps, that is, there is not, in the majority of the cases, any new survey data, more likely general descriptions of where the new boundaries should exist, or references to adjacent properties, even calls to documents recorded many years ago, referring to them just by the document number. In those cases we have to consider the intent of the owner when describing the property in the deed.Another couple of factors that have an impact in the accuracy of our data comes from the fact that we assembled this vast amount of information with digital data provided from at least a dozen of cities, Los Angeles, Long Beach, Torrance, etc. plus all the data gathered by LACO DPW in CAD format. We had to compile all that data, rectify it and adjusted as needed, always keeping in mind that the integrity of the data should be maintained by matching RECORDED information. Another factor is that the data was also coming from tens of thousands of individual recordings, it wasn’t as clean cut as when you look at a single subdivision, no matter how big, where every line is clearly identified by a bearing and a distance within a perfectly traced boundary. Our original data sources even go back as far as remainder pieces of land described by Spanish grants and ranchos, section land plus newer surveys.Even though we always input our data based on survey records using COGO tools, whenever possible, a lot of the data is not. Considering all that, our GIS layer is by far, the most accurate data set of its size available anywhere in the county, both in positional accuracy, and conformity to the information provided by legal sources.All that being said, the resulting fact is that, as mark mentioned, in some areas our data will be very accurate, in others it won’t. The most important thing to keep in mind is that given that our responsibility is to reflect property information as recorded, we do not use anything else as a guide, for example we never use an aerial image to change the position of a line just because it doesn’t fall on top of a fence shown on a photo; remember that many people build their fenced, especially the ones made out of concrete blocks, a couple of inches inside the property boundary because is difficult to dig a trench along an existing wooden or wire fence, now multiply those little variances spread out over a 4000+ square miles of land and you will get a picture of what we are up to.That’s why we continually try to stress in anybody using our data that, if they need total accuracy they will need to hire a surveyor to get it. Our 11 by 17 maps are our only official source of information and should only be used for assessment purposes, or in the case of other uses, just for information, to get an accurate idea of how close to the real location a line could be.
Service Item Id: c1a492a67a664c5b9fde717647f6436d
Copyright Text: Emilio Solano
Los Angeles County
Assessor
500 W Temple Street
Los Angeles, CA 90012
esolano@assessor.lacounty.gov
Description: The Office of the Assessor maintains assessment records of real and personal property in the County of Los Angeles. Many of these records are available for sale. The data is available in the form of CD-ROM, DVD, hardcopy, and on-line access. The Office of the Assessor also offers a GIS Tax Parcel Base Map.Some layers included (not an exhaustive list):parcel boundary map (shapefile format)local rollLA County wall mappublicly owned parcelssales listunsecured rolland labels (for mailings)A discussion of parcel accuracyOccasionally questions about the spatial accuracy of parcel information come up. In general, it is important to note that the parcels are for tax assessment purposes only, come from many sources, some historical, and are not necessarily survey grade. That said, they are in general extremely reliable.Here is a longer description from Emilio Solano, head of the Assessor Mapping and GIS Services:The very short answer is this: our data is in its majority accurate within a couple of feet, in other cases will not be so accurate.The issue of accuracy when applied to assessor’s data is very subjective. Our data is very accurate if we consider that all the information matches recorded information, we try our best to keep recent data as it was recorded, and older data gets slightly adjusted to match the most recent data. Another factor to consider is that about one third of the total number of new parcels created every year comes from deeds, not subdivision maps, that is, there is not, in the majority of the cases, any new survey data, more likely general descriptions of where the new boundaries should exist, or references to adjacent properties, even calls to documents recorded many years ago, referring to them just by the document number. In those cases we have to consider the intent of the owner when describing the property in the deed.Another couple of factors that have an impact in the accuracy of our data comes from the fact that we assembled this vast amount of information with digital data provided from at least a dozen of cities, Los Angeles, Long Beach, Torrance, etc. plus all the data gathered by LACO DPW in CAD format. We had to compile all that data, rectify it and adjusted as needed, always keeping in mind that the integrity of the data should be maintained by matching RECORDED information. Another factor is that the data was also coming from tens of thousands of individual recordings, it wasn’t as clean cut as when you look at a single subdivision, no matter how big, where every line is clearly identified by a bearing and a distance within a perfectly traced boundary. Our original data sources even go back as far as remainder pieces of land described by Spanish grants and ranchos, section land plus newer surveys.Even though we always input our data based on survey records using COGO tools, whenever possible, a lot of the data is not. Considering all that, our GIS layer is by far, the most accurate data set of its size available anywhere in the county, both in positional accuracy, and conformity to the information provided by legal sources.All that being said, the resulting fact is that, as mark mentioned, in some areas our data will be very accurate, in others it won’t. The most important thing to keep in mind is that given that our responsibility is to reflect property information as recorded, we do not use anything else as a guide, for example we never use an aerial image to change the position of a line just because it doesn’t fall on top of a fence shown on a photo; remember that many people build their fenced, especially the ones made out of concrete blocks, a couple of inches inside the property boundary because is difficult to dig a trench along an existing wooden or wire fence, now multiply those little variances spread out over a 4000+ square miles of land and you will get a picture of what we are up to.That’s why we continually try to stress in anybody using our data that, if they need total accuracy they will need to hire a surveyor to get it. Our 11 by 17 maps are our only official source of information and should only be used for assessment purposes, or in the case of other uses, just for information, to get an accurate idea of how close to the real location a line could be.
Service Item Id: c1a492a67a664c5b9fde717647f6436d
Copyright Text: Emilio Solano
Los Angeles County
Assessor
500 W Temple Street
Los Angeles, CA 90012
esolano@assessor.lacounty.gov
Description: The Office of the Assessor maintains assessment records of real and personal property in the County of Los Angeles. Many of these records are available for sale. The data is available in the form of CD-ROM, DVD, hardcopy, and on-line access. The Office of the Assessor also offers a GIS Tax Parcel Base Map.Some layers included (not an exhaustive list):parcel boundary map (shapefile format)local rollLA County wall mappublicly owned parcelssales listunsecured rolland labels (for mailings)A discussion of parcel accuracyOccasionally questions about the spatial accuracy of parcel information come up. In general, it is important to note that the parcels are for tax assessment purposes only, come from many sources, some historical, and are not necessarily survey grade. That said, they are in general extremely reliable.Here is a longer description from Emilio Solano, head of the Assessor Mapping and GIS Services:The very short answer is this: our data is in its majority accurate within a couple of feet, in other cases will not be so accurate.The issue of accuracy when applied to assessor’s data is very subjective. Our data is very accurate if we consider that all the information matches recorded information, we try our best to keep recent data as it was recorded, and older data gets slightly adjusted to match the most recent data. Another factor to consider is that about one third of the total number of new parcels created every year comes from deeds, not subdivision maps, that is, there is not, in the majority of the cases, any new survey data, more likely general descriptions of where the new boundaries should exist, or references to adjacent properties, even calls to documents recorded many years ago, referring to them just by the document number. In those cases we have to consider the intent of the owner when describing the property in the deed.Another couple of factors that have an impact in the accuracy of our data comes from the fact that we assembled this vast amount of information with digital data provided from at least a dozen of cities, Los Angeles, Long Beach, Torrance, etc. plus all the data gathered by LACO DPW in CAD format. We had to compile all that data, rectify it and adjusted as needed, always keeping in mind that the integrity of the data should be maintained by matching RECORDED information. Another factor is that the data was also coming from tens of thousands of individual recordings, it wasn’t as clean cut as when you look at a single subdivision, no matter how big, where every line is clearly identified by a bearing and a distance within a perfectly traced boundary. Our original data sources even go back as far as remainder pieces of land described by Spanish grants and ranchos, section land plus newer surveys.Even though we always input our data based on survey records using COGO tools, whenever possible, a lot of the data is not. Considering all that, our GIS layer is by far, the most accurate data set of its size available anywhere in the county, both in positional accuracy, and conformity to the information provided by legal sources.All that being said, the resulting fact is that, as mark mentioned, in some areas our data will be very accurate, in others it won’t. The most important thing to keep in mind is that given that our responsibility is to reflect property information as recorded, we do not use anything else as a guide, for example we never use an aerial image to change the position of a line just because it doesn’t fall on top of a fence shown on a photo; remember that many people build their fenced, especially the ones made out of concrete blocks, a couple of inches inside the property boundary because is difficult to dig a trench along an existing wooden or wire fence, now multiply those little variances spread out over a 4000+ square miles of land and you will get a picture of what we are up to.That’s why we continually try to stress in anybody using our data that, if they need total accuracy they will need to hire a surveyor to get it. Our 11 by 17 maps are our only official source of information and should only be used for assessment purposes, or in the case of other uses, just for information, to get an accurate idea of how close to the real location a line could be.
Service Item Id: c1a492a67a664c5b9fde717647f6436d
Copyright Text: Emilio Solano
Los Angeles County
Assessor
500 W Temple Street
Los Angeles, CA 90012
esolano@assessor.lacounty.gov
Description: The Office of the Assessor maintains assessment records of real and personal property in the County of Los Angeles. Many of these records are available for sale. The data is available in the form of CD-ROM, DVD, hardcopy, and on-line access. The Office of the Assessor also offers a GIS Tax Parcel Base Map.Some layers included (not an exhaustive list):parcel boundary map (shapefile format)local rollLA County wall mappublicly owned parcelssales listunsecured rolland labels (for mailings)A discussion of parcel accuracyOccasionally questions about the spatial accuracy of parcel information come up. In general, it is important to note that the parcels are for tax assessment purposes only, come from many sources, some historical, and are not necessarily survey grade. That said, they are in general extremely reliable.Here is a longer description from Emilio Solano, head of the Assessor Mapping and GIS Services:The very short answer is this: our data is in its majority accurate within a couple of feet, in other cases will not be so accurate.The issue of accuracy when applied to assessor’s data is very subjective. Our data is very accurate if we consider that all the information matches recorded information, we try our best to keep recent data as it was recorded, and older data gets slightly adjusted to match the most recent data. Another factor to consider is that about one third of the total number of new parcels created every year comes from deeds, not subdivision maps, that is, there is not, in the majority of the cases, any new survey data, more likely general descriptions of where the new boundaries should exist, or references to adjacent properties, even calls to documents recorded many years ago, referring to them just by the document number. In those cases we have to consider the intent of the owner when describing the property in the deed.Another couple of factors that have an impact in the accuracy of our data comes from the fact that we assembled this vast amount of information with digital data provided from at least a dozen of cities, Los Angeles, Long Beach, Torrance, etc. plus all the data gathered by LACO DPW in CAD format. We had to compile all that data, rectify it and adjusted as needed, always keeping in mind that the integrity of the data should be maintained by matching RECORDED information. Another factor is that the data was also coming from tens of thousands of individual recordings, it wasn’t as clean cut as when you look at a single subdivision, no matter how big, where every line is clearly identified by a bearing and a distance within a perfectly traced boundary. Our original data sources even go back as far as remainder pieces of land described by Spanish grants and ranchos, section land plus newer surveys.Even though we always input our data based on survey records using COGO tools, whenever possible, a lot of the data is not. Considering all that, our GIS layer is by far, the most accurate data set of its size available anywhere in the county, both in positional accuracy, and conformity to the information provided by legal sources.All that being said, the resulting fact is that, as mark mentioned, in some areas our data will be very accurate, in others it won’t. The most important thing to keep in mind is that given that our responsibility is to reflect property information as recorded, we do not use anything else as a guide, for example we never use an aerial image to change the position of a line just because it doesn’t fall on top of a fence shown on a photo; remember that many people build their fenced, especially the ones made out of concrete blocks, a couple of inches inside the property boundary because is difficult to dig a trench along an existing wooden or wire fence, now multiply those little variances spread out over a 4000+ square miles of land and you will get a picture of what we are up to.That’s why we continually try to stress in anybody using our data that, if they need total accuracy they will need to hire a surveyor to get it. Our 11 by 17 maps are our only official source of information and should only be used for assessment purposes, or in the case of other uses, just for information, to get an accurate idea of how close to the real location a line could be.
Service Item Id: c1a492a67a664c5b9fde717647f6436d
Copyright Text: Emilio Solano
Los Angeles County
Assessor
500 W Temple Street
Los Angeles, CA 90012
esolano@assessor.lacounty.gov
Description: The Office of the Assessor maintains assessment records of real and personal property in the County of Los Angeles. Many of these records are available for sale. The data is available in the form of CD-ROM, DVD, hardcopy, and on-line access. The Office of the Assessor also offers a GIS Tax Parcel Base Map.Some layers included (not an exhaustive list):parcel boundary map (shapefile format)local rollLA County wall mappublicly owned parcelssales listunsecured rolland labels (for mailings)A discussion of parcel accuracyOccasionally questions about the spatial accuracy of parcel information come up. In general, it is important to note that the parcels are for tax assessment purposes only, come from many sources, some historical, and are not necessarily survey grade. That said, they are in general extremely reliable.Here is a longer description from Emilio Solano, head of the Assessor Mapping and GIS Services:The very short answer is this: our data is in its majority accurate within a couple of feet, in other cases will not be so accurate.The issue of accuracy when applied to assessor’s data is very subjective. Our data is very accurate if we consider that all the information matches recorded information, we try our best to keep recent data as it was recorded, and older data gets slightly adjusted to match the most recent data. Another factor to consider is that about one third of the total number of new parcels created every year comes from deeds, not subdivision maps, that is, there is not, in the majority of the cases, any new survey data, more likely general descriptions of where the new boundaries should exist, or references to adjacent properties, even calls to documents recorded many years ago, referring to them just by the document number. In those cases we have to consider the intent of the owner when describing the property in the deed.Another couple of factors that have an impact in the accuracy of our data comes from the fact that we assembled this vast amount of information with digital data provided from at least a dozen of cities, Los Angeles, Long Beach, Torrance, etc. plus all the data gathered by LACO DPW in CAD format. We had to compile all that data, rectify it and adjusted as needed, always keeping in mind that the integrity of the data should be maintained by matching RECORDED information. Another factor is that the data was also coming from tens of thousands of individual recordings, it wasn’t as clean cut as when you look at a single subdivision, no matter how big, where every line is clearly identified by a bearing and a distance within a perfectly traced boundary. Our original data sources even go back as far as remainder pieces of land described by Spanish grants and ranchos, section land plus newer surveys.Even though we always input our data based on survey records using COGO tools, whenever possible, a lot of the data is not. Considering all that, our GIS layer is by far, the most accurate data set of its size available anywhere in the county, both in positional accuracy, and conformity to the information provided by legal sources.All that being said, the resulting fact is that, as mark mentioned, in some areas our data will be very accurate, in others it won’t. The most important thing to keep in mind is that given that our responsibility is to reflect property information as recorded, we do not use anything else as a guide, for example we never use an aerial image to change the position of a line just because it doesn’t fall on top of a fence shown on a photo; remember that many people build their fenced, especially the ones made out of concrete blocks, a couple of inches inside the property boundary because is difficult to dig a trench along an existing wooden or wire fence, now multiply those little variances spread out over a 4000+ square miles of land and you will get a picture of what we are up to.That’s why we continually try to stress in anybody using our data that, if they need total accuracy they will need to hire a surveyor to get it. Our 11 by 17 maps are our only official source of information and should only be used for assessment purposes, or in the case of other uses, just for information, to get an accurate idea of how close to the real location a line could be.
Service Item Id: c1a492a67a664c5b9fde717647f6436d
Copyright Text: Emilio Solano
Los Angeles County
Assessor
500 W Temple Street
Los Angeles, CA 90012
esolano@assessor.lacounty.gov
Description: The Office of the Assessor maintains assessment records of real and personal property in the County of Los Angeles. Many of these records are available for sale. The data is available in the form of CD-ROM, DVD, hardcopy, and on-line access. The Office of the Assessor also offers a GIS Tax Parcel Base Map.Some layers included (not an exhaustive list):parcel boundary map (shapefile format)local rollLA County wall mappublicly owned parcelssales listunsecured rolland labels (for mailings)A discussion of parcel accuracyOccasionally questions about the spatial accuracy of parcel information come up. In general, it is important to note that the parcels are for tax assessment purposes only, come from many sources, some historical, and are not necessarily survey grade. That said, they are in general extremely reliable.Here is a longer description from Emilio Solano, head of the Assessor Mapping and GIS Services:The very short answer is this: our data is in its majority accurate within a couple of feet, in other cases will not be so accurate.The issue of accuracy when applied to assessor’s data is very subjective. Our data is very accurate if we consider that all the information matches recorded information, we try our best to keep recent data as it was recorded, and older data gets slightly adjusted to match the most recent data. Another factor to consider is that about one third of the total number of new parcels created every year comes from deeds, not subdivision maps, that is, there is not, in the majority of the cases, any new survey data, more likely general descriptions of where the new boundaries should exist, or references to adjacent properties, even calls to documents recorded many years ago, referring to them just by the document number. In those cases we have to consider the intent of the owner when describing the property in the deed.Another couple of factors that have an impact in the accuracy of our data comes from the fact that we assembled this vast amount of information with digital data provided from at least a dozen of cities, Los Angeles, Long Beach, Torrance, etc. plus all the data gathered by LACO DPW in CAD format. We had to compile all that data, rectify it and adjusted as needed, always keeping in mind that the integrity of the data should be maintained by matching RECORDED information. Another factor is that the data was also coming from tens of thousands of individual recordings, it wasn’t as clean cut as when you look at a single subdivision, no matter how big, where every line is clearly identified by a bearing and a distance within a perfectly traced boundary. Our original data sources even go back as far as remainder pieces of land described by Spanish grants and ranchos, section land plus newer surveys.Even though we always input our data based on survey records using COGO tools, whenever possible, a lot of the data is not. Considering all that, our GIS layer is by far, the most accurate data set of its size available anywhere in the county, both in positional accuracy, and conformity to the information provided by legal sources.All that being said, the resulting fact is that, as mark mentioned, in some areas our data will be very accurate, in others it won’t. The most important thing to keep in mind is that given that our responsibility is to reflect property information as recorded, we do not use anything else as a guide, for example we never use an aerial image to change the position of a line just because it doesn’t fall on top of a fence shown on a photo; remember that many people build their fenced, especially the ones made out of concrete blocks, a couple of inches inside the property boundary because is difficult to dig a trench along an existing wooden or wire fence, now multiply those little variances spread out over a 4000+ square miles of land and you will get a picture of what we are up to.That’s why we continually try to stress in anybody using our data that, if they need total accuracy they will need to hire a surveyor to get it. Our 11 by 17 maps are our only official source of information and should only be used for assessment purposes, or in the case of other uses, just for information, to get an accurate idea of how close to the real location a line could be.
Service Item Id: c1a492a67a664c5b9fde717647f6436d
Copyright Text: Emilio Solano
Los Angeles County
Assessor
500 W Temple Street
Los Angeles, CA 90012
esolano@assessor.lacounty.gov
Description: The Office of the Assessor maintains assessment records of real and personal property in the County of Los Angeles. Many of these records are available for sale. The data is available in the form of CD-ROM, DVD, hardcopy, and on-line access. The Office of the Assessor also offers a GIS Tax Parcel Base Map.Some layers included (not an exhaustive list):parcel boundary map (shapefile format)local rollLA County wall mappublicly owned parcelssales listunsecured rolland labels (for mailings)A discussion of parcel accuracyOccasionally questions about the spatial accuracy of parcel information come up. In general, it is important to note that the parcels are for tax assessment purposes only, come from many sources, some historical, and are not necessarily survey grade. That said, they are in general extremely reliable.Here is a longer description from Emilio Solano, head of the Assessor Mapping and GIS Services:The very short answer is this: our data is in its majority accurate within a couple of feet, in other cases will not be so accurate.The issue of accuracy when applied to assessor’s data is very subjective. Our data is very accurate if we consider that all the information matches recorded information, we try our best to keep recent data as it was recorded, and older data gets slightly adjusted to match the most recent data. Another factor to consider is that about one third of the total number of new parcels created every year comes from deeds, not subdivision maps, that is, there is not, in the majority of the cases, any new survey data, more likely general descriptions of where the new boundaries should exist, or references to adjacent properties, even calls to documents recorded many years ago, referring to them just by the document number. In those cases we have to consider the intent of the owner when describing the property in the deed.Another couple of factors that have an impact in the accuracy of our data comes from the fact that we assembled this vast amount of information with digital data provided from at least a dozen of cities, Los Angeles, Long Beach, Torrance, etc. plus all the data gathered by LACO DPW in CAD format. We had to compile all that data, rectify it and adjusted as needed, always keeping in mind that the integrity of the data should be maintained by matching RECORDED information. Another factor is that the data was also coming from tens of thousands of individual recordings, it wasn’t as clean cut as when you look at a single subdivision, no matter how big, where every line is clearly identified by a bearing and a distance within a perfectly traced boundary. Our original data sources even go back as far as remainder pieces of land described by Spanish grants and ranchos, section land plus newer surveys.Even though we always input our data based on survey records using COGO tools, whenever possible, a lot of the data is not. Considering all that, our GIS layer is by far, the most accurate data set of its size available anywhere in the county, both in positional accuracy, and conformity to the information provided by legal sources.All that being said, the resulting fact is that, as mark mentioned, in some areas our data will be very accurate, in others it won’t. The most important thing to keep in mind is that given that our responsibility is to reflect property information as recorded, we do not use anything else as a guide, for example we never use an aerial image to change the position of a line just because it doesn’t fall on top of a fence shown on a photo; remember that many people build their fenced, especially the ones made out of concrete blocks, a couple of inches inside the property boundary because is difficult to dig a trench along an existing wooden or wire fence, now multiply those little variances spread out over a 4000+ square miles of land and you will get a picture of what we are up to.That’s why we continually try to stress in anybody using our data that, if they need total accuracy they will need to hire a surveyor to get it. Our 11 by 17 maps are our only official source of information and should only be used for assessment purposes, or in the case of other uses, just for information, to get an accurate idea of how close to the real location a line could be.
Service Item Id: c1a492a67a664c5b9fde717647f6436d
Copyright Text: Emilio Solano
Los Angeles County
Assessor
500 W Temple Street
Los Angeles, CA 90012
esolano@assessor.lacounty.gov
Description: The Office of the Assessor maintains assessment records of real and personal property in the County of Los Angeles. Many of these records are available for sale. The data is available in the form of CD-ROM, DVD, hardcopy, and on-line access. The Office of the Assessor also offers a GIS Tax Parcel Base Map.Some layers included (not an exhaustive list):parcel boundary map (shapefile format)local rollLA County wall mappublicly owned parcelssales listunsecured rolland labels (for mailings)A discussion of parcel accuracyOccasionally questions about the spatial accuracy of parcel information come up. In general, it is important to note that the parcels are for tax assessment purposes only, come from many sources, some historical, and are not necessarily survey grade. That said, they are in general extremely reliable.Here is a longer description from Emilio Solano, head of the Assessor Mapping and GIS Services:The very short answer is this: our data is in its majority accurate within a couple of feet, in other cases will not be so accurate.The issue of accuracy when applied to assessor’s data is very subjective. Our data is very accurate if we consider that all the information matches recorded information, we try our best to keep recent data as it was recorded, and older data gets slightly adjusted to match the most recent data. Another factor to consider is that about one third of the total number of new parcels created every year comes from deeds, not subdivision maps, that is, there is not, in the majority of the cases, any new survey data, more likely general descriptions of where the new boundaries should exist, or references to adjacent properties, even calls to documents recorded many years ago, referring to them just by the document number. In those cases we have to consider the intent of the owner when describing the property in the deed.Another couple of factors that have an impact in the accuracy of our data comes from the fact that we assembled this vast amount of information with digital data provided from at least a dozen of cities, Los Angeles, Long Beach, Torrance, etc. plus all the data gathered by LACO DPW in CAD format. We had to compile all that data, rectify it and adjusted as needed, always keeping in mind that the integrity of the data should be maintained by matching RECORDED information. Another factor is that the data was also coming from tens of thousands of individual recordings, it wasn’t as clean cut as when you look at a single subdivision, no matter how big, where every line is clearly identified by a bearing and a distance within a perfectly traced boundary. Our original data sources even go back as far as remainder pieces of land described by Spanish grants and ranchos, section land plus newer surveys.Even though we always input our data based on survey records using COGO tools, whenever possible, a lot of the data is not. Considering all that, our GIS layer is by far, the most accurate data set of its size available anywhere in the county, both in positional accuracy, and conformity to the information provided by legal sources.All that being said, the resulting fact is that, as mark mentioned, in some areas our data will be very accurate, in others it won’t. The most important thing to keep in mind is that given that our responsibility is to reflect property information as recorded, we do not use anything else as a guide, for example we never use an aerial image to change the position of a line just because it doesn’t fall on top of a fence shown on a photo; remember that many people build their fenced, especially the ones made out of concrete blocks, a couple of inches inside the property boundary because is difficult to dig a trench along an existing wooden or wire fence, now multiply those little variances spread out over a 4000+ square miles of land and you will get a picture of what we are up to.That’s why we continually try to stress in anybody using our data that, if they need total accuracy they will need to hire a surveyor to get it. Our 11 by 17 maps are our only official source of information and should only be used for assessment purposes, or in the case of other uses, just for information, to get an accurate idea of how close to the real location a line could be.
Service Item Id: c1a492a67a664c5b9fde717647f6436d
Copyright Text: Emilio Solano
Los Angeles County
Assessor
500 W Temple Street
Los Angeles, CA 90012
esolano@assessor.lacounty.gov
Description: The Office of the Assessor maintains assessment records of real and personal property in the County of Los Angeles. Many of these records are available for sale. The data is available in the form of CD-ROM, DVD, hardcopy, and on-line access. The Office of the Assessor also offers a GIS Tax Parcel Base Map.Some layers included (not an exhaustive list):parcel boundary map (shapefile format)local rollLA County wall mappublicly owned parcelssales listunsecured rolland labels (for mailings)A discussion of parcel accuracyOccasionally questions about the spatial accuracy of parcel information come up. In general, it is important to note that the parcels are for tax assessment purposes only, come from many sources, some historical, and are not necessarily survey grade. That said, they are in general extremely reliable.Here is a longer description from Emilio Solano, head of the Assessor Mapping and GIS Services:The very short answer is this: our data is in its majority accurate within a couple of feet, in other cases will not be so accurate.The issue of accuracy when applied to assessor’s data is very subjective. Our data is very accurate if we consider that all the information matches recorded information, we try our best to keep recent data as it was recorded, and older data gets slightly adjusted to match the most recent data. Another factor to consider is that about one third of the total number of new parcels created every year comes from deeds, not subdivision maps, that is, there is not, in the majority of the cases, any new survey data, more likely general descriptions of where the new boundaries should exist, or references to adjacent properties, even calls to documents recorded many years ago, referring to them just by the document number. In those cases we have to consider the intent of the owner when describing the property in the deed.Another couple of factors that have an impact in the accuracy of our data comes from the fact that we assembled this vast amount of information with digital data provided from at least a dozen of cities, Los Angeles, Long Beach, Torrance, etc. plus all the data gathered by LACO DPW in CAD format. We had to compile all that data, rectify it and adjusted as needed, always keeping in mind that the integrity of the data should be maintained by matching RECORDED information. Another factor is that the data was also coming from tens of thousands of individual recordings, it wasn’t as clean cut as when you look at a single subdivision, no matter how big, where every line is clearly identified by a bearing and a distance within a perfectly traced boundary. Our original data sources even go back as far as remainder pieces of land described by Spanish grants and ranchos, section land plus newer surveys.Even though we always input our data based on survey records using COGO tools, whenever possible, a lot of the data is not. Considering all that, our GIS layer is by far, the most accurate data set of its size available anywhere in the county, both in positional accuracy, and conformity to the information provided by legal sources.All that being said, the resulting fact is that, as mark mentioned, in some areas our data will be very accurate, in others it won’t. The most important thing to keep in mind is that given that our responsibility is to reflect property information as recorded, we do not use anything else as a guide, for example we never use an aerial image to change the position of a line just because it doesn’t fall on top of a fence shown on a photo; remember that many people build their fenced, especially the ones made out of concrete blocks, a couple of inches inside the property boundary because is difficult to dig a trench along an existing wooden or wire fence, now multiply those little variances spread out over a 4000+ square miles of land and you will get a picture of what we are up to.That’s why we continually try to stress in anybody using our data that, if they need total accuracy they will need to hire a surveyor to get it. Our 11 by 17 maps are our only official source of information and should only be used for assessment purposes, or in the case of other uses, just for information, to get an accurate idea of how close to the real location a line could be.
Service Item Id: c1a492a67a664c5b9fde717647f6436d
Copyright Text: Emilio Solano
Los Angeles County
Assessor
500 W Temple Street
Los Angeles, CA 90012
esolano@assessor.lacounty.gov
Description: The Office of the Assessor maintains assessment records of real and personal property in the County of Los Angeles. Many of these records are available for sale. The data is available in the form of CD-ROM, DVD, hardcopy, and on-line access. The Office of the Assessor also offers a GIS Tax Parcel Base Map.Some layers included (not an exhaustive list):parcel boundary map (shapefile format)local rollLA County wall mappublicly owned parcelssales listunsecured rolland labels (for mailings)A discussion of parcel accuracyOccasionally questions about the spatial accuracy of parcel information come up. In general, it is important to note that the parcels are for tax assessment purposes only, come from many sources, some historical, and are not necessarily survey grade. That said, they are in general extremely reliable.Here is a longer description from Emilio Solano, head of the Assessor Mapping and GIS Services:The very short answer is this: our data is in its majority accurate within a couple of feet, in other cases will not be so accurate.The issue of accuracy when applied to assessor’s data is very subjective. Our data is very accurate if we consider that all the information matches recorded information, we try our best to keep recent data as it was recorded, and older data gets slightly adjusted to match the most recent data. Another factor to consider is that about one third of the total number of new parcels created every year comes from deeds, not subdivision maps, that is, there is not, in the majority of the cases, any new survey data, more likely general descriptions of where the new boundaries should exist, or references to adjacent properties, even calls to documents recorded many years ago, referring to them just by the document number. In those cases we have to consider the intent of the owner when describing the property in the deed.Another couple of factors that have an impact in the accuracy of our data comes from the fact that we assembled this vast amount of information with digital data provided from at least a dozen of cities, Los Angeles, Long Beach, Torrance, etc. plus all the data gathered by LACO DPW in CAD format. We had to compile all that data, rectify it and adjusted as needed, always keeping in mind that the integrity of the data should be maintained by matching RECORDED information. Another factor is that the data was also coming from tens of thousands of individual recordings, it wasn’t as clean cut as when you look at a single subdivision, no matter how big, where every line is clearly identified by a bearing and a distance within a perfectly traced boundary. Our original data sources even go back as far as remainder pieces of land described by Spanish grants and ranchos, section land plus newer surveys.Even though we always input our data based on survey records using COGO tools, whenever possible, a lot of the data is not. Considering all that, our GIS layer is by far, the most accurate data set of its size available anywhere in the county, both in positional accuracy, and conformity to the information provided by legal sources.All that being said, the resulting fact is that, as mark mentioned, in some areas our data will be very accurate, in others it won’t. The most important thing to keep in mind is that given that our responsibility is to reflect property information as recorded, we do not use anything else as a guide, for example we never use an aerial image to change the position of a line just because it doesn’t fall on top of a fence shown on a photo; remember that many people build their fenced, especially the ones made out of concrete blocks, a couple of inches inside the property boundary because is difficult to dig a trench along an existing wooden or wire fence, now multiply those little variances spread out over a 4000+ square miles of land and you will get a picture of what we are up to.That’s why we continually try to stress in anybody using our data that, if they need total accuracy they will need to hire a surveyor to get it. Our 11 by 17 maps are our only official source of information and should only be used for assessment purposes, or in the case of other uses, just for information, to get an accurate idea of how close to the real location a line could be.
Service Item Id: c1a492a67a664c5b9fde717647f6436d
Copyright Text: Emilio Solano
Los Angeles County
Assessor
500 W Temple Street
Los Angeles, CA 90012
esolano@assessor.lacounty.gov
Description: The Office of the Assessor maintains assessment records of real and personal property in the County of Los Angeles. Many of these records are available for sale. The data is available in the form of CD-ROM, DVD, hardcopy, and on-line access. The Office of the Assessor also offers a GIS Tax Parcel Base Map.Some layers included (not an exhaustive list):parcel boundary map (shapefile format)local rollLA County wall mappublicly owned parcelssales listunsecured rolland labels (for mailings)A discussion of parcel accuracyOccasionally questions about the spatial accuracy of parcel information come up. In general, it is important to note that the parcels are for tax assessment purposes only, come from many sources, some historical, and are not necessarily survey grade. That said, they are in general extremely reliable.Here is a longer description from Emilio Solano, head of the Assessor Mapping and GIS Services:The very short answer is this: our data is in its majority accurate within a couple of feet, in other cases will not be so accurate.The issue of accuracy when applied to assessor’s data is very subjective. Our data is very accurate if we consider that all the information matches recorded information, we try our best to keep recent data as it was recorded, and older data gets slightly adjusted to match the most recent data. Another factor to consider is that about one third of the total number of new parcels created every year comes from deeds, not subdivision maps, that is, there is not, in the majority of the cases, any new survey data, more likely general descriptions of where the new boundaries should exist, or references to adjacent properties, even calls to documents recorded many years ago, referring to them just by the document number. In those cases we have to consider the intent of the owner when describing the property in the deed.Another couple of factors that have an impact in the accuracy of our data comes from the fact that we assembled this vast amount of information with digital data provided from at least a dozen of cities, Los Angeles, Long Beach, Torrance, etc. plus all the data gathered by LACO DPW in CAD format. We had to compile all that data, rectify it and adjusted as needed, always keeping in mind that the integrity of the data should be maintained by matching RECORDED information. Another factor is that the data was also coming from tens of thousands of individual recordings, it wasn’t as clean cut as when you look at a single subdivision, no matter how big, where every line is clearly identified by a bearing and a distance within a perfectly traced boundary. Our original data sources even go back as far as remainder pieces of land described by Spanish grants and ranchos, section land plus newer surveys.Even though we always input our data based on survey records using COGO tools, whenever possible, a lot of the data is not. Considering all that, our GIS layer is by far, the most accurate data set of its size available anywhere in the county, both in positional accuracy, and conformity to the information provided by legal sources.All that being said, the resulting fact is that, as mark mentioned, in some areas our data will be very accurate, in others it won’t. The most important thing to keep in mind is that given that our responsibility is to reflect property information as recorded, we do not use anything else as a guide, for example we never use an aerial image to change the position of a line just because it doesn’t fall on top of a fence shown on a photo; remember that many people build their fenced, especially the ones made out of concrete blocks, a couple of inches inside the property boundary because is difficult to dig a trench along an existing wooden or wire fence, now multiply those little variances spread out over a 4000+ square miles of land and you will get a picture of what we are up to.That’s why we continually try to stress in anybody using our data that, if they need total accuracy they will need to hire a surveyor to get it. Our 11 by 17 maps are our only official source of information and should only be used for assessment purposes, or in the case of other uses, just for information, to get an accurate idea of how close to the real location a line could be.
Service Item Id: c1a492a67a664c5b9fde717647f6436d
Copyright Text: Emilio Solano
Los Angeles County
Assessor
500 W Temple Street
Los Angeles, CA 90012
esolano@assessor.lacounty.gov
Description: The Office of the Assessor maintains assessment records of real and personal property in the County of Los Angeles. Many of these records are available for sale. The data is available in the form of CD-ROM, DVD, hardcopy, and on-line access. The Office of the Assessor also offers a GIS Tax Parcel Base Map.Some layers included (not an exhaustive list):parcel boundary map (shapefile format)local rollLA County wall mappublicly owned parcelssales listunsecured rolland labels (for mailings)A discussion of parcel accuracyOccasionally questions about the spatial accuracy of parcel information come up. In general, it is important to note that the parcels are for tax assessment purposes only, come from many sources, some historical, and are not necessarily survey grade. That said, they are in general extremely reliable.Here is a longer description from Emilio Solano, head of the Assessor Mapping and GIS Services:The very short answer is this: our data is in its majority accurate within a couple of feet, in other cases will not be so accurate.The issue of accuracy when applied to assessor’s data is very subjective. Our data is very accurate if we consider that all the information matches recorded information, we try our best to keep recent data as it was recorded, and older data gets slightly adjusted to match the most recent data. Another factor to consider is that about one third of the total number of new parcels created every year comes from deeds, not subdivision maps, that is, there is not, in the majority of the cases, any new survey data, more likely general descriptions of where the new boundaries should exist, or references to adjacent properties, even calls to documents recorded many years ago, referring to them just by the document number. In those cases we have to consider the intent of the owner when describing the property in the deed.Another couple of factors that have an impact in the accuracy of our data comes from the fact that we assembled this vast amount of information with digital data provided from at least a dozen of cities, Los Angeles, Long Beach, Torrance, etc. plus all the data gathered by LACO DPW in CAD format. We had to compile all that data, rectify it and adjusted as needed, always keeping in mind that the integrity of the data should be maintained by matching RECORDED information. Another factor is that the data was also coming from tens of thousands of individual recordings, it wasn’t as clean cut as when you look at a single subdivision, no matter how big, where every line is clearly identified by a bearing and a distance within a perfectly traced boundary. Our original data sources even go back as far as remainder pieces of land described by Spanish grants and ranchos, section land plus newer surveys.Even though we always input our data based on survey records using COGO tools, whenever possible, a lot of the data is not. Considering all that, our GIS layer is by far, the most accurate data set of its size available anywhere in the county, both in positional accuracy, and conformity to the information provided by legal sources.All that being said, the resulting fact is that, as mark mentioned, in some areas our data will be very accurate, in others it won’t. The most important thing to keep in mind is that given that our responsibility is to reflect property information as recorded, we do not use anything else as a guide, for example we never use an aerial image to change the position of a line just because it doesn’t fall on top of a fence shown on a photo; remember that many people build their fenced, especially the ones made out of concrete blocks, a couple of inches inside the property boundary because is difficult to dig a trench along an existing wooden or wire fence, now multiply those little variances spread out over a 4000+ square miles of land and you will get a picture of what we are up to.That’s why we continually try to stress in anybody using our data that, if they need total accuracy they will need to hire a surveyor to get it. Our 11 by 17 maps are our only official source of information and should only be used for assessment purposes, or in the case of other uses, just for information, to get an accurate idea of how close to the real location a line could be.
Service Item Id: c1a492a67a664c5b9fde717647f6436d
Copyright Text: Emilio Solano
Los Angeles County
Assessor
500 W Temple Street
Los Angeles, CA 90012
esolano@assessor.lacounty.gov
Description: The Office of the Assessor maintains assessment records of real and personal property in the County of Los Angeles. Many of these records are available for sale. The data is available in the form of CD-ROM, DVD, hardcopy, and on-line access. The Office of the Assessor also offers a GIS Tax Parcel Base Map.Some layers included (not an exhaustive list):parcel boundary map (shapefile format)local rollLA County wall mappublicly owned parcelssales listunsecured rolland labels (for mailings)A discussion of parcel accuracyOccasionally questions about the spatial accuracy of parcel information come up. In general, it is important to note that the parcels are for tax assessment purposes only, come from many sources, some historical, and are not necessarily survey grade. That said, they are in general extremely reliable.Here is a longer description from Emilio Solano, head of the Assessor Mapping and GIS Services:The very short answer is this: our data is in its majority accurate within a couple of feet, in other cases will not be so accurate.The issue of accuracy when applied to assessor’s data is very subjective. Our data is very accurate if we consider that all the information matches recorded information, we try our best to keep recent data as it was recorded, and older data gets slightly adjusted to match the most recent data. Another factor to consider is that about one third of the total number of new parcels created every year comes from deeds, not subdivision maps, that is, there is not, in the majority of the cases, any new survey data, more likely general descriptions of where the new boundaries should exist, or references to adjacent properties, even calls to documents recorded many years ago, referring to them just by the document number. In those cases we have to consider the intent of the owner when describing the property in the deed.Another couple of factors that have an impact in the accuracy of our data comes from the fact that we assembled this vast amount of information with digital data provided from at least a dozen of cities, Los Angeles, Long Beach, Torrance, etc. plus all the data gathered by LACO DPW in CAD format. We had to compile all that data, rectify it and adjusted as needed, always keeping in mind that the integrity of the data should be maintained by matching RECORDED information. Another factor is that the data was also coming from tens of thousands of individual recordings, it wasn’t as clean cut as when you look at a single subdivision, no matter how big, where every line is clearly identified by a bearing and a distance within a perfectly traced boundary. Our original data sources even go back as far as remainder pieces of land described by Spanish grants and ranchos, section land plus newer surveys.Even though we always input our data based on survey records using COGO tools, whenever possible, a lot of the data is not. Considering all that, our GIS layer is by far, the most accurate data set of its size available anywhere in the county, both in positional accuracy, and conformity to the information provided by legal sources.All that being said, the resulting fact is that, as mark mentioned, in some areas our data will be very accurate, in others it won’t. The most important thing to keep in mind is that given that our responsibility is to reflect property information as recorded, we do not use anything else as a guide, for example we never use an aerial image to change the position of a line just because it doesn’t fall on top of a fence shown on a photo; remember that many people build their fenced, especially the ones made out of concrete blocks, a couple of inches inside the property boundary because is difficult to dig a trench along an existing wooden or wire fence, now multiply those little variances spread out over a 4000+ square miles of land and you will get a picture of what we are up to.That’s why we continually try to stress in anybody using our data that, if they need total accuracy they will need to hire a surveyor to get it. Our 11 by 17 maps are our only official source of information and should only be used for assessment purposes, or in the case of other uses, just for information, to get an accurate idea of how close to the real location a line could be.
Service Item Id: c1a492a67a664c5b9fde717647f6436d
Copyright Text: Emilio Solano
Los Angeles County
Assessor
500 W Temple Street
Los Angeles, CA 90012
esolano@assessor.lacounty.gov
Description: The Office of the Assessor maintains assessment records of real and personal property in the County of Los Angeles. Many of these records are available for sale. The data is available in the form of CD-ROM, DVD, hardcopy, and on-line access. The Office of the Assessor also offers a GIS Tax Parcel Base Map.Some layers included (not an exhaustive list):parcel boundary map (shapefile format)local rollLA County wall mappublicly owned parcelssales listunsecured rolland labels (for mailings)A discussion of parcel accuracyOccasionally questions about the spatial accuracy of parcel information come up. In general, it is important to note that the parcels are for tax assessment purposes only, come from many sources, some historical, and are not necessarily survey grade. That said, they are in general extremely reliable.Here is a longer description from Emilio Solano, head of the Assessor Mapping and GIS Services:The very short answer is this: our data is in its majority accurate within a couple of feet, in other cases will not be so accurate.The issue of accuracy when applied to assessor’s data is very subjective. Our data is very accurate if we consider that all the information matches recorded information, we try our best to keep recent data as it was recorded, and older data gets slightly adjusted to match the most recent data. Another factor to consider is that about one third of the total number of new parcels created every year comes from deeds, not subdivision maps, that is, there is not, in the majority of the cases, any new survey data, more likely general descriptions of where the new boundaries should exist, or references to adjacent properties, even calls to documents recorded many years ago, referring to them just by the document number. In those cases we have to consider the intent of the owner when describing the property in the deed.Another couple of factors that have an impact in the accuracy of our data comes from the fact that we assembled this vast amount of information with digital data provided from at least a dozen of cities, Los Angeles, Long Beach, Torrance, etc. plus all the data gathered by LACO DPW in CAD format. We had to compile all that data, rectify it and adjusted as needed, always keeping in mind that the integrity of the data should be maintained by matching RECORDED information. Another factor is that the data was also coming from tens of thousands of individual recordings, it wasn’t as clean cut as when you look at a single subdivision, no matter how big, where every line is clearly identified by a bearing and a distance within a perfectly traced boundary. Our original data sources even go back as far as remainder pieces of land described by Spanish grants and ranchos, section land plus newer surveys.Even though we always input our data based on survey records using COGO tools, whenever possible, a lot of the data is not. Considering all that, our GIS layer is by far, the most accurate data set of its size available anywhere in the county, both in positional accuracy, and conformity to the information provided by legal sources.All that being said, the resulting fact is that, as mark mentioned, in some areas our data will be very accurate, in others it won’t. The most important thing to keep in mind is that given that our responsibility is to reflect property information as recorded, we do not use anything else as a guide, for example we never use an aerial image to change the position of a line just because it doesn’t fall on top of a fence shown on a photo; remember that many people build their fenced, especially the ones made out of concrete blocks, a couple of inches inside the property boundary because is difficult to dig a trench along an existing wooden or wire fence, now multiply those little variances spread out over a 4000+ square miles of land and you will get a picture of what we are up to.That’s why we continually try to stress in anybody using our data that, if they need total accuracy they will need to hire a surveyor to get it. Our 11 by 17 maps are our only official source of information and should only be used for assessment purposes, or in the case of other uses, just for information, to get an accurate idea of how close to the real location a line could be.
Service Item Id: c1a492a67a664c5b9fde717647f6436d
Copyright Text: Emilio Solano
Los Angeles County
Assessor
500 W Temple Street
Los Angeles, CA 90012
esolano@assessor.lacounty.gov